Foreword: We Understand Your Procurement Process
If you’re a system integrator working in the yacht or marine sector, the core concerns in sourcing a high-pressure pump aren’t “price” or “marketing features,” but two critical questions:
- Will this pump run reliably in my actual system?
- If I order 100 or 200 units, will they all perform consistently, without failures in the hands of end users?
Our typical customers purchase 100–300 units annually—but every project starts with 1 or 2 sample pumps for rigorous testing. Through a process of technical evaluation, system integration, on-board trials, and factory visits, we support our clients through to stable volume delivery.
1. Why One Pump Failure Isn’t Acceptable—We Understand Your Risk
- You don’t sell pumps—you sell systems. If the pump fails, it’s your entire water or hydraulic system that appears unreliable to your end user.
- Marine repairs are costly and difficult. A single failure often means dismantling equipment, deploying service crews, or making offshore repairs.
- Your brand is built on delivery reliability. A single project setback can affect future orders or entire regional partnerships.
Some of our customers switched to us after failures with previous suppliers that caused rework and compensation issues in international projects. Since switching, they’ve built a predictable, replicable delivery framework using our pumps.
2. From Sample Testing to Volume Supply—Our Full Support Chain
- Sample Phase – You begin with 1–2 units from the HPS 0.6 / 0.8 / 1.0 series for testing. We provide:
- Complete selection guidance
- Flow, noise, and temperature stability tests in your system
- Full documentation: installation drawings, technical datasheets, test records
- On-Site Factory Evaluation – Many customers visit our workshop to verify batch consistency. You can:
- Inspect flow rate accuracy at multiple speeds/pressures
- Measure real-time noise and vibration levels
- Audit our production and QC procedures
- Volume Delivery – Every unit shipped passes through:
- 100% flow rate testing (±3% tolerance)
- Noise measurement (below 74 dB)
- Pressure sealing and 8-hour runtime validation
- Ongoing Support – We provide dedicated technical assistance for integrator clients:
- Fine-tuning system parameters
- Rapid feedback on abnormal cases
- Scheduled stock programs for short lead time
3. Model Selection: Matching HPS Pumps to Marine Applications
| Model | Flow (85 bar @ 2500 rpm) | Recommended Vessel Size | Typical Applications |
|---|---|---|---|
| HPS0.6 | 0.58 m³/h (9.7 L/min) | 30–50 ft yachts | Small RO units, hatch hydraulics |
| HPS0.8 | 0.75 m³/h (12.5 L/min) | 50–70 ft cruisers | Mid-range RO, deck wash systems |
| HPS1.0 | 0.94 m³/h (15.7 L/min) | 70–90 ft yachts or vessels | High-flow RO, integrated fresh water |
Whether your clients are private yacht owners, custom boatbuilders, or commercial vessel operators, our pumps are already running in similar systems with over 12 months of stable field results.
Conclusion: You’re Not Buying a Pump—You’re Securing Project Reliability
Every successful system handover is built on trust in every component.
If you’re designing a marine RO, hydraulic lift, or cleaning system, we welcome you to start with a sample unit:
- We’ll support your integration and tuning process
- We’re ready for long-term volume delivery
- We’re here to reduce your project risk
Samples are just the beginning—consistent volume supply is the real measure of a pump supplier’s value.
